
Pros
- MagnaCut blade is durable and sharp
- All tools open from the outside
Cons
- It’s expensive compared to similar multitools
It’s hard to nail down one aspect of the Arc that I like best, because it does just about everything well. The opening and closing mechanism is responsive and every tool is accessible from the outside. Plus, the 20 listed functions all work well, as opposed to those on some other multitools that feel like afterthoughts for the sake of an eye-popping marketing claim. This effectiveness across the board is precisely why it is our new best overall pick.
In comparison to our former best overall pick, the Victorinox Spirit X, the Arc shines the brightest when looking at its blade. Unlike the Spirit X, which is made entirely of stainless steel, the knife on the Arc is made of MagnaCut. That means it’s more resistant to corrosion and rust and retains its edge longer.
Beyond this, the blade is simply wider, longer, and based on a pretty basic touch test, feels a lot sharper. In my hands, it made it easier to poke through boxes sealed with duct tape and slice off a chunk of an apple.
The Arc also comes with a larger set of scissors, a thicker saw, and a larger file. Furthermore, it’s equipped with a hip clip that slides directly onto your pants while the Spirit X requires a holster that must be looped through your belt to carry it on your person outside of a pocket.
Key Specs
| Dimensions | 4.25 x 1.3 x 0.68 in. |
| Weight | 8.6 oz |
| Material | Stainless steel |
| Number of Tools/Functions | 20 |

Pros
- Extendable driver makes it easier to screw in hard to reach or tight spaces
- Blade is longer than others we've tested
- Full bit set included
Cons
- Far too bulky to carry in a pants pocket on a day to day basis
While no multitool can replace a set of full-size hand tools, the Gerber Gear Center-Drive multitool is by far the closest that we’ve tested. The foldable center-axis provides a lot more length in comparison to the average multitool screwdriver, which gives you extra reach for tight spaces.
The blade on the Center-Drive is also the longest of any that we’ve tested. It feels large enough to take on real cutting responsibility like thick rope or small branches. The high-carbon steel also ensures long-term durability so you don’t have to worry about constantly sharpening the blade between uses.
The Center-Drive is bulkier than other options on this list, but the included nylon sheath is designed to slip onto your belt. Another plus is that there’s a full bit set included.
Key Specs
| Dimensions | 7 x 4 x 2 in. |
| Weight | 1 lb |
| Material | High carbon steel, stainless steel |
| Number of Tool Functions | 16 |
Advertisement - Continue Reading Below

Pros
- All of the tools performed adequately for this price
- Comes with a nylon sheath to attach to a belt
Cons
- Bulky
RoverTac’s 12-in-1 initially caught our eye because it has a good number of useful tools—and it’s affordable, too. While it might be bulky and heavy, we have to admit it’s a decent value. We don’t expect it to hold up to intense use, but in a “save your butt” kind of capacity, it’s certainly holds up to light use.
The long-nosed pliers, wire cutter, and wire stripper all worked reasonably well, as did the can and bottle openers and various screwdrivers. RoverTac claims the tool includes a saw blade, but it’s more like a serrated knife, which worked—just not very well.
The plain knife blade is sharper than it looks and easily cut through rope and twine during our tests. The 12-in-1 comes with a sewn nylon sheath to attach to your belt. Don’t expect this to be the pride of your tool collection, but when you need it most, it will be there.
Key Specs
| Dimensions | 6.3 x 5.1 x 1 in. |
| Weight | 10.7 oz |
| Material | Stainless steel |
| Number of Tools/Functions | 14 |

Pros
- Lighter than most similar multitools by almost an ounce
- File and saw work effectively, even as one piece
Cons
- Not actually 24 separate tools
Fresh out of the box, the Swiss Tool Spirit X impressed us with its design and finish. The tools are packed into the frame very closely, like scientific instrumentation. All the tools—save one—deploy from the outside of the frame, so you can access them without much hassle. The company claims 24 tools in this multitool, but we counted 23, including one that’s simply a hook for a lanyard.
While the needle-nose pliers, wire cutters, scissors, three standard screwdrivers, and can opener work well, it was the less common tools that really impressed us. This is the first multi we’ve seen with a metal saw, which is on the edge of the file. It cut through mild steel hardware surprisingly well, and the file did a nice job cleaning up the edges when we were done.
The Phillips screwdriver shank flares out at the end so that all four points on the head are the same size, making for very solid engagement. The Spirit X’s bottle opener is made from wide stainless steel stock, which keeps it flat on the bottle cap so it doesn’t slip or cut into the cap. The combination reamer-punch efficiently opens up holes in wood, leather, and soft metals, and it can drill holes through 3⁄4-inch pine board.
An all-around great pick, this multitool will get the job done, no matter what that job happens to be.
Key Specs
| Dimensions | 0.03 x 0.08 x 0.03 in. |
| Weight | 7.4 oz |
| Material | Stainless steel |
| Number of Tools/Functions | 24 |
Advertisement - Continue Reading Below
Pros
- Large, one-handed scissors for easy cutting
- MagnaCut steel blade for extra corrosion resistance
Cons
- Hefty weight and size without a hip or belt clip
The next iteration in one of Leatherman’s most popular lines comes with a weighty price tag. But it’s justified, since we had a hard time finding fault with the Wave Alpha.
The multitool comes with a standard knife blade, a saw, a file, and a pair of scissors. The file worked well smoothing out nails, and the saw comfortably powered through small branches.
However, we were most pleasantly impressed with the scissors. They’re much larger than any other pair of scissors we've seen on a multitool (“the largest cutting surface ever on a pliers-based Leatherman,” according to the brand). Because of their size and the spring that pushes the handle back up after every snip, we were able to hold the bottom still in hand and easily use our thumb to press down on the blade to cut. This simplified cutting through large pieces of paper, even for those of us who are lefties (since nearly no scissors are designed for cutting with our dominant hand).
The classic pocket knife is made of MagnaCut steel, which is corrosion-resistant and has great edge retention. During testing, we focused on everyday items like twine, paper, cardboard, and zip ties and opening sealed packages. We never needed more than one stern pull of the blade to get through any of them.
The central tool of the Wave Alpha is the plier-wire cutter, which we found easy to use thanks to the biting grip of the ridges and the ergonomic handle.
Though Leatherman lists 16 tools, we counted closer to 12. For instance, the file is designated as two separate tools, with the traditional flat side counting as one and the diamond-coated edge counting as another. That’s a fairly common embellishment with multitool descriptions.
Key Specs
| Dimensions | 4.04 x 1.36 x 0.84 in. |
| Weight | 8.26 oz |
| Material | Stainless Steel |
| Number of Tools/Functions | 16 |
Pros
- Magnetic holder makes swapping out screwdriver heads easy
- Larger-than-average scissors
Cons
- You may have to sharpen the blade right out of the box
With its svelte, minimalist frame featuring three main tools, this Gerber cuts down on the unnecessary junk and keeps its tools simple and effective.
As a pocket knife–based multitool, it features a full 3-inch, locking plain blade. Although it isn’t the sharpest right out of the box, it cut cleanly through paper, plastic, rope, twine, and steak, and was adequate for some light whittling.
The side opposite the blade features a hex bit driver and scissors. The driver has a reversible bit in a magnetic holder—we love this because you get legit flat and Phillips screwdrivers that just plain work.
The scissors are a bit larger than those found on other models and were easy to control when cutting out intricate shapes from paper to medium cardboard. Between the scissors and the driver is a sharp, narrow awl. We weren't able to use this to drill holes in wood and plastic, but it works well, as intended, to poke holes through leather and canvas.
Rounding out the eight functions is a nice bottle opener that pivots off the end of the tool frame. It doubles as a pry bar (the bottle opener flipped over) and a “hammer” (the wide base of the bottle opener). Is it less a hammer and more just a flat surface for hitting things? Sure. But when you need to finish tapping in a tent stake or small nail, it’ll do.
Key Specs
| Dimensions | 3.5 x 0.6 x 0.6 in. |
| Weight | 3.98 oz |
| Material | Aluminum |
| Number of Tools/Functions | 8 |
Advertisement - Continue Reading Below

Pros
- Detachable ferro rod is great for starting campfires
- The carabiner makes it easy to clip to your pack
Cons
- The hammer tool leaves a lot to be desired
The plier-based Leatherman Signal comes with several standard items, including a stainless steel blade and a serrated saw. However, it impressed us most with its several outdoor-specific functions.
These include a detachable ferro rod that, in combination with the serrated saw, creates sparks for your campfire. The ferro rod also doubles as an emergency whistle. During testing, I was particularly pleased with the carabiner on the bottom of the multitool. While not a major feature, being able to clip it onto my hiking backpack and forget about it made it so much easier to carry with me than other options.
Perhaps the only major downside is the hammer tool. It functions more like a blunt, flat end you can use in a pinch.
Key Specs
| Dimensions | 4.04 x 1.36 x 0.84 in. |
| Weight | 7.5 oz |
| Material | Stainless steel |
| Number of Tools/Functions | 19 |

Pros
- Comes with keychain ring
- Scissor center is more effective that fold out scissors on larger multitools
Cons
- Won't replace a traditional multitool due to lack of classic tools
Everyday life doesn’t always require a saw, hammer, or bulky pliers. The Leatherman Micra is a keychain tool, and it doesn’t pretend to be anything else. The Micra hosts a number of items that are still quite handy when small and, importantly, are often the most useful in day-to-day life.
The multitool is built around a pair of scissors, which are the perfect size for cutting tags and snipping loose threads. Tools on the body include tweezers, a nail file and cleaner, a small screwdriver, and a bottle opener, among others.
While carrying the Leatherman Micra around, I was genuinely astonished at how often I used it. I frequently pulled it out for small tasks like picking something out from under my nails, plucking a small hair out of place, or tightening the screws on my sunglasses’ hinges.
The Micra works so well because it knows what it is. The convenience and portability make it hard to go anywhere without it.
Key Specs
| Dimensions | 4.2 x 0.75 x 0.37 in. |
| Weight | 1.8 oz |
| Material | Stainless steel |
| Number of Tools/Functions | 10 |
Advertisement - Continue Reading Below
Pros
- Widest plier jaws of the tools we tested
- Nylon sheath for holding the tool when not in use
Cons
- The screwdriver was hard to use in cramped spaces
With its wide frame and large plier jaws, the Dual-Force is a beast of a multitool. You can open the pliers and slip the pivot to spread the dual-position jaws extra wide to grab large fasteners or objects. The jaws feature three separate gripping areas: two for large or small round objects and one for gripping flat things. We appreciated their versatility for holding well in a variety of situations.
One of our favorite things about the Dual-Force is that all the other tools are accessible when the pliers are closed. This multitool also features a bit holder with two Phillips and one plain screwdriver bit. We regard these among the most useful multitool screwdrivers available, although they are sometimes difficult to use in tight spaces.
The Dual-Force is rounded out with a large knife, a saw blade, and a three-sided file. The knife blade is reasonably sharp out of the box, and we easily cut through thick rope with it. We used the saw blade to cut both green and dried-out sticks and branches with relative ease. We were able to use the file on both wood and metal, although it was better suited for the metal.
Key Specs
| Dimensions | 0.84 x 4.65 in. |
| Weight | 12 oz |
| Material | Steel |
| Number of Tools/Functions | 12 |
Tom Price is a reviews editor for Popular Mechanics while also contributing to Runner's World, Best Products, and Bicycling. Here at Popular Mechanics, Tom loves testing out home appliances, smart tech, gear for city life and outdoor adventures, small gadgets like watches and multitools, and anything else you can find piled up at his hoarder's nest of a desk.
Prior to working here, Tom attended NYU, graduating with a degree in English and a minor in creative writing. He also wrote for Best Reviews, The Daily Beast, and other publications covering tech, fitness gear, gadgets, and lifestyle products. Furthermore, he covered startup news, pop culture, and even professional wrestling. To follow more of his work, check back here for new stories.
Will Egensteiner has been reviewing products for 10 years, testing and writing about everything from climbing gear to video game consoles to cars. He began his career as an intern at Popular Mechanics, then worked as an editor at Outside, spearheading the magazine's gear coverage and biannual Buyer's Guide. Now that he's back, he leads product reviews for PopMech, as well as Runner's World, Best Products, and Biography. His favorite stuff to review is still outdoors equipment, and he can tell you from memory what ePTFE stands for.








